The PCB Viewer needs a desktop
This tool is built for larger screens and a mouse. Open this page on a computer to load a Gerber zip and inspect the board layer by layer.
Engineering tools
Runs in your browserPCB Viewer
Open the Gerber files, the KiCad project or the Altium documents for a Landi board and review it layer by layer, in 2D and 3D, without installing an ECAD tool.
Drag and drop your board files here
Board-shop zip (Gerber RS-274X / X2 + NC drill), loose layer files, KiCad .kicad_pcb / .kicad_sch, or Altium .PcbDoc / .SchDoc · Up to 20 MB · Desktop browsers
Reading your board…
Unpacking and rendering in your browser. Dense boards can take a few seconds.
Files are unpacked and rendered in your browser and are never uploaded or stored. Layer types are detected from the file names; the 3D view uses the outline layer and the drill files.
Supported: Gerber RS-274X and X2 with Excellon / XNC drill files, as exported by KiCad, Altium, Eagle, OrCAD, Allegro and DipTrace; native KiCad 6+ boards and schematics (2D, in the viewer's own toolbar); native Altium .PcbDoc boards (2D and 3D) and .SchDoc schematics, with a .PrjPcb for the project's text strings. Eagle native files are not supported.
How it works
Review a board in three steps
- 01
Drop the manufacturing zip
Drag in the zip your board house would receive (Gerber layers plus NC drill files, up to 20 MB), the layer files themselves, or native KiCad or Altium board and schematic files. Everything is unpacked in your browser and never uploaded.
- 02
Click through the board
Switch between top and bottom, hide layers to see what sits underneath, zoom into a footprint, and measure a clearance in millimetres or mils.
- 03
Spin it in 3D
Open the 3D view to orbit the board with its real thickness and drill holes, then send us your notes.
